Rainbird 13mm brown PC AS dripline, 1.5 lph flow, 40cm spacing, 100m coil

• The flexible brown dripline tubing shall have factory installed pressure compensating, inline emitters spaced evenly per listed spacing.
• The flow rate from each installed inline emitter shall be 2.0 or 3.5 L/Hr when the inlet pressure is between 50 to 350 kPa.
• The inline emitter shall have an extra long labyrinth to reduce flow while creating high turbulence to avoid grit accumulation in the emitter. The inline emitter shall include a diaphragm design that delivers anti-siphon functionality to protect each emitter from ingesting grit and debris at the end of each irrigation cycle by sealing the emitter when there is negative pressure in the tube.
• The inline emitter shall have a long outlet pool with a raised wall design to maximize the distance between the emitter outlet and the tube hole to further reduce grit and debris suck-back. XFA dripline shall be manufactured in Australia and sold by Rain Bird Corporation.

Features:

•  Through the use of a proprietary tubing material blend, XFA dripline has exceptional flexibility and kink resistance.
• XFA dripline has a bend radius of 4” allowing installation in narrow zones with tight curves. 
• The low profile XFA emitter design reduces pressure loss resulting in lateral run lengths over 25% longer than competitor products 
•  Accepts industry standard 13mm insert fittings
•  Available in a variety of flow rates, emitter spacings, and coil lengths 
• Both brown and lilac colors available Reliable 
• The pressure compensating XFA emitter design provides a consistent flow from every emitter with changes in elevation and throughout the entire lateral resulting in reliable and consistent irrigation throughout the zone 
•  Anti-siphon protection avoids clogged emitters by resisting ingestion of grit and debris into the emitter at the end of each irrigation cycle Operating Range 
•  Pressure: 50 to 350 kPa (7.25 to 50 psi) 
•  Flow Rates: 2.0 and 3.5 L/Hr 
• Filtration Requirement: 120 mesh 
•  Water Temperature: Up to 43° C (110° F)

Specifications 

•  OD: 15.3mm • ID: 13mm
• Wall Thickness: 1.14mm 
•  Emitter Spacing: 40  
•  Coil Lengths: 100
•  Tube Color: Brown