Pedrollo Drainage Submersible Pump With Float Switch 240V Single Phase

Specifications

 Application

• The D series pumps are recommended for domestic, civil and professional applications for draining flooded interiors such as basements and garages, for emptying swimming pools and tanks, for disposal ofwaste water which is not sewage.

Features

• 5 m maximum immersion depth (with a sufficiently long power cable)
• Maximum liquid temperature +40 °C
• Passage of suspended solids up to Ø 10 mm
• Suction down to 17 mm above ground level
• Minimum immersion depth for continuous service: 220 mm

Construction

• 1 PUMP BODY Cast iron with an Epoxy Electro Coating treatment, with threaded port in compliance with ISO 228/1
• 2 SUCTION FILTER Stainless steel AISI 304
• 3 SUCTION PLATE Stainless steel AISI 304
• 4 IMPELLER Technopolymer open type
• 5 MOTOR CASING Stainless steel AISI 304
• 6 MOTOR CASING PLATE Stainless steel AISI 304
• 7 MOTOR SHAFT Stainless steel AISI 431
• 8 SHAFT WITH DOUBLE MECHANICAL SEAL SEPARATED BY AN OIL CHAMBER
• Pump Model D8, D10, D20
• Seal Model MG1-14D SIC
• Shaft Diameter Ø 14 mm
• Position Motor side, Pump side Materials
• Stationary ring Silicon carbide,Silicon carbide
• Rotational ring Graphite Silicon carbide
• Elastomer NBR NBR
• (Double seal on shaft with a ring seal Ø 16 x Ø 24 x H 5 mm)
• Pump Model D30
• Seal Model ST1-14 SIC
• Shaft Diameter Ø 14 mm
• Materials
• Stationary ring Ceramic
• Rotational ring Silicon carbide
• Elastomer NBR

The product image shown is for illustration purpose only