Puretec Iron & Hydrogen Sulphide Removal System Auto Backwash 70/80/90 L/Min
Product Description
Description
The Puretec IRX2000 is an advanced catalytic iron removal system, designed specifically for applications where both iron and sediment are present. Iron is usually the cause of the notorious orange-brown staining often seen on fences and buildings, and indoors in wet areas such as toilet bowls. In addition to staining, at higher levels it causes corrosion and damage to valves and fixtures. Unlike traditional iron removal systems, the IRX Series is also suitable where low levels of Hydrogen Sulphide are present - one of the most common causes of bad odour in ground water.
Removes orange and brown staining, sediment and bad odour in ground water
The Puretec IRX2000 is also suitable where low levels of Hydrogen Sulphide are present - one of the most common causes of bad odour in ground water. It is also designed for applications where both iron and sediment are present. Iron is usually the cause of the notorious orange-brown staining that causes corrosion and damage to valves and fixtures.
|
FEATURES & BENEFITS |
|
Designed to reduce staining & deposits from iron, manganese and sediment. |
|
Prevent the staining and rust build up in your water system. |
|
Automatic backwash set and forget. |
|
Stores system configuration and operation data in non-volatile memory. |
|
Weather resistant cover for controller. |
|
Weatherproof transformer. |
|
Flexible programming options. |
|
Volume-based backwash options available for up to 450,000/day litres from a single unit. |
|
SPECIFICATIONS |
|
|
Ordering Code |
IRX2000 |
|
Valve |
Automatic E1-matic |
|
pH Range |
6.5 - 9 |
|
Flow Rate |
20/30/40 Lpm |
|
Maximum Flow Rate |
70/80/90 Lpm |
|
Connection |
1 Male BSPT, ¾ Drain |
|
Min/Max Pressure |
250 - 690 kPa |
|
Operating Temperature |
5 - 45°C (41 - 113°F) |
|
Power Supply |
230V AC / 50 Hz |
|
Warranty |
1 year^ |
|
Replacement Media Kits |
RMK-IRX2000 |
|
Accessories |
WTV5090 - Micro switch for automation of external equipment. |
|
|
WTV5000 - Bypass assembly for testing, and maintenance. |
|
|
WTV5092 - Differential pressure switch for load based backwashing. |
|
|
WTZ1000 - Inline aerator for increasing oxygen content |
The product image shown is for illustration purpose only